Error Message; Fax sending or copy operation in ; Print operation in process- Page 124

110

No Response/Busy

The number you dialed does not 
answer or is busy.

Verify the number and try again.

Not Registered

You tried to access a One Touch 
or Speed Dial number that is not 
programmed.

Set up the One Touch or Speed Dial 
number.
(See 

Storing one touch dial numbers

on page 54 and 

Storing speed dial numbers

on page 55.)

Out of Memory

The machine’s memory is full.

Fax sending or copy operation in 
progress

Do one of the following:

„

Press 

Start

 to send or copy the scanned 

pages.

„

Press 

Stop/Exit

 and wait until the other 

operations in progress finish, and then try 
again.

„

Clear the data from the memory. (See 

Out of memory message

 on page 38 or 

page 75.)

Print operation in process

Do one of the following:

„

Reduce print resolution. (See 

Advanced 

tab in the Software User’s Guide on the 
CD-ROM

.)

„

Clear the faxes from the memory. (See 

Out of memory message

 on page 75.)

Print Unable XX

The machine has a mechanical 
problem.

Do one of the following:

„

(MFC-7340, MFC-7345N and MFC-
7440N only)
See 

Transferring your faxes or Fax 

Journal report

 on page 111 before 

disconnecting the machine so you will 
not lose any important messages.
Then, disconnect the machine from the 
power for several minutes and then 
reconnect it.

„

(MFC-7840W only)
Disconnect the machine from the power 
for several minutes, then reconnect it. 
(The machine can be turned off for 
approximately 4 days without losing 
faxes stored in the memory. See 

Transferring your faxes or Fax Journal 
report

 on page 111.)

Error Message

Cause

Action