Error during printing; Protocol-specific troubleshooting; Windows® 98/98SE/Me and Windows NT®4.0 Peer-to-Peer print (LPR) troubleshooting- Page 82

Troubleshooting

10 - 5

10

(4) Click Add.

(5) Make the following selection. Make sure that your print server appears. If it is visible, then the 

connection is good.

4

If you have tried 1 to 4 above and it does not work, then reset the print server back to the default factory 
settings and try from the initial setup again. For information how to reset to the default factory settings, 
see Restoring the network settings to factory default on page 3-15

Error during printing

If you try to print while other users are printing large amounts of data (e.g. many pages or color pages with 
high resolution), the printer is unable to accept your print job until the ongoing printing is finished. If the waiting 
time of your print job exceeds a certain limit, a time out situation occurs, which causes the error message. In 
such situations, execute the print job again after the other jobs are completed.

Protocol-specific troubleshooting

Windows

®

 98/98SE/Me and Windows NT

®

4.0 Peer-to-Peer print (LPR) 

troubleshooting

If you are having trouble printing on a Windows

®

 98/98SE/Me, Windows NT

®

 4.0 or later Peer-to-Peer 

network (LPR method), check the following:

1

Make sure that the Brother LPR Port driver is correctly installed and configured according to the 
Windows

®

 98/98SE/Me or Windows NT

® 

4.0 Peer-to-Peer chapters.

2

Try to turn the Byte Count on in the Configure port area of printer driver properties.

(Mac OS

®

X 10.2.4 - 10.3.x)

(Mac OS

®

X 10.4)