3 Attaching the paper guide; 4 Connecting the power supply- Page 17

17

The printer contains a paper guide which can hold up to 10 individual label sheets.

5

Push down the roll release lever and close the 

DK Roll cover.

If the DK Roll edge cannot be pushed in just before the 

cutter (as described in step 4), insert the edge of the DK 

Roll as far as possible and pull down the release lever. 
When finished, close the DK Roll cover.

Pressing Feed button feeds the DK Roll to the correct 

position (when using DK Tape, cut the fed tape as 
needed).

1

As shown in the right hand 

illustration, attach the paper 

guide to the front face of the 

printer.

When printing more than 10 

labels continuously using the 
auto cut function, remove the 

paper guide to prevent a paper 

jam.

1

Plug the power cord into an electrical outlet.

•

Check that the electrical outlet is 120V AC before 
plugging the power cord.

•

Unplug the power cord from the electrical outlet after 

you have finished using the QL-500.

•

Do not pull the power cord when unplugging it from 

the electrical outlet. The wire in the power cord may 

become damaged.

•

Do not connect the QL-500 to the computer until directed to do so when 

installing the printer driver. For how to install the printer driver and software, 

refer to 

Î

 "Software installation Guide".

3 Attaching the paper guide

Paper guide

4 Connecting the power supply