For safe operation; For a longer service life; For repair or adjustment- Page 7

PLEASE READ BEFORE USING THIS MACHINE

For safe operation
1. Be sure to keep your eye on the needle while sewing.  Do not touch the balance wheel, thread take-up, needle, or other

moving parts.

2. Remember to turn off the power switch and unplug the cord when:

• Operation is completed
• Replacing or removing the needle or any other parts
• A power failure occurs during use
• Maintaining the machine
• Leaving the machine unattended.

3. Do not store anything on the foot controller.
4. Plug the machine directly into the wall.  Do not use extension cords.

For a longer service life
1. When storing this machine, avoid direct sunlight and high humidity locations. Do not use or store the machine near a space

heater, iron, halogen lamp, or other hot objects.

2. Use only neutral soaps or detergents to clean the case.  Benzene, thinner, and scouring powders can damage the case

and machine, and should never be used.

3. Do not drop or hit the machine.
4. Always consult the operation manual when replacing or installing any assemblies, the presser feet, needle, or other parts

to assure correct installation.

For repair or adjustment
In the event a malfunction occurs or adjustment is required, first follow the troubleshooting table in the back of the operation
manual to inspect and adjust the machine yourself.  If the problem persists, please consult your local authorized dealer.