How to Check- Page 279

yellow

blue     

6-20

Then, without shutting off the engine, follow these steps:

1. The transaxle fluid dipstick top is a round, red loop

and is located next to the brake master cylinder
behind the engine block. Pull out the dipstick and
wipe it with a clean rag or paper towel.

2. Push it back in all the way, wait three seconds and

then pull it back out again.

3. Check both sides of the dipstick, and read the 

lower level. The fluid level must be in the
cross

-

hatched area.

4. If the fluid level is in the acceptable range, push the

dipstick back in all the way.