Tire Inspection and Rotation- Page 319

6-47

To reset (calibrate) the system:

1. Turn the ignition switch to RUN.

2. Press the GAGE INFO button on the DIC until 

TIRE PRESSURE appears on the display.

3. Press and hold the DIC RESET button for about 

five seconds. After five seconds, the display will
show TIRE PRESSURE RESET. If TIRE
PRESSURE RESET does not appear in the display
after about five seconds retry the process. If it does
not work after two tries, see your dealer for service.
After you release the DIC RESET button, TIRE
PRESSURE NORMAL will appear in the display.

The system completes the calibration process during
driving. Calibration time can take 45 to 90 minutes,
depending on your driving habits. After the system 
has been calibrated, the system will alert the driver 
that a tire is low, up to a maximum speed of 
65 mph (105 km/h).

Tire Inspection and Rotation

Tires should be rotated every 6,000 to 8,000 miles 
(10 000 to 13 000 km). Any time you notice unusual
wear, rotate your tires as soon as possible and check
wheel alignment. Also check for damaged tires or
wheels. See “When It’s Time for New Tires” 
and “Wheel Replacement” later in this section for 
more information.

The purpose of regular rotation is to achieve more
uniform wear for all tires on the vehicle. The first
rotation is the most important. See “Scheduled
Maintenance Services” in the Index for scheduled
rotation intervals.

When rotating your tires, always use the correct rotation
pattern shown here.