Security Feedback; Mode 1:; Mode 2:- Page 76

2-13

Security Feedback

This feature provides feedback to the driver when the
vehicle receives a command from the remote keyless
entry transmitter. Feedback is only provided if all 
doors are closed, the ignition is off and the RAP is
inactive. One of the following modes may be selected
for each transmitter:

Mode 1: No feedback when locking or 
unlocking vehicle.

Mode 2: Parking lamps, back

-

up lamps and the 

DRL exterior lamps will flash twice when unlocking
the vehicle and flash once when locking the vehicle.

Mode 3: Horn chirps when all doors are unlocked
(second time the button is pressed) and when locking 
the vehicle.

Mode 4: Parking lamps, back

-

up lamps and the DRL

exterior lamps will flash twice each time the button with
the unlock symbol is pressed; the horn chirps when 
all doors are unlocked. Parking lamps and the DRL
exterior lamps flash once and the horn chirps when
locking the vehicle.

Feedback will be provided according to the mode that
has been selected. The exterior lamps will not flash if
the manual parking lamps are on.

If your vehicle is equipped with the DIC, you must
program this feature using it. See “Driver Information
Center (DIC)” in the Index.

If your vehicle is not equipped with the DIC, do the
following to change to another mode:

1. Close all the doors and turn the ignition on. 

Keep all doors closed throughout this procedure.

2. Press and hold LOCK on the driver’s power door

lock switch throughout this procedure. All the doors
will lock.

3. Press the trunk button on the transmitter. 

The security feedback will remain in its current
mode. The horn will chirp as feedback.

4. Press the trunk button again. Each time the trunk

button is pressed, the security feedback will advance
to the next mode, and the horn will chirp.

5. Release the power door lock switch. The 

security feedback will remain in the most 
current mode selected.