Matching Transmitter(s) to Your Vehicle; Battery Replacement; When replacing the battery, use care not to - Page 77

2-14

This procedure only changes the mode for the
transmitter used to change this setting. The procedure
will need to be repeated for the second transmitter.

To verify the mode selected, remove the key from the
ignition and close all of the doors after you’ve exited 
the vehicle. Press the lock button on the transmitter to 
be verified and confirm the appropriate feedback.
Repeat with the unlock button.

Matching Transmitter(s) to Your Vehicle

Each remote keyless entry transmitter is coded to
prevent another transmitter from unlocking your vehicle.
If a transmitter is lost or stolen, a replacement can be
purchased through your dealer. Remember to bring 
any remaining transmitters with you when you go to
your dealer. When the dealer matches the replacement
transmitter to your vehicle, any remaining transmitters
must also be matched. Once your dealer has coded the
new transmitter, the lost transmitter will not unlock your
vehicle. Each vehicle can have a maximum of four
transmitters matched to it.

See your dealer to have additional transmitters matched
to your vehicle.

Battery Replacement

Under normal use, the battery in your remote keyless
entry transmitter should last about four years.

You can tell the battery is weak if the transmitter won’t
work at the normal range in any location. If you have 
to get close to your vehicle before the transmitter works,
it’s probably time to change the battery.

NOTICE:

When replacing the battery, use care not to 
touch any of the circuitry. Static from your 
body transferred to these surfaces may damage
the transmitter.