Scanning
35
2
Brightness
2
Adjust the setting (-50 to 50) to get the best image. The default value is 0, representing an average.
You can set the
Brightness
level by dragging the slide bar to the right or left to lighten or darken the image.
You can also enter a value in the box to set the level.
If the scanned image is too light, set a lower
Brightness
level and scan the document again. If the image is
too dark, set a higher
Brightness
level and scan the document again.
Note
The Brightness setting is only available when
Black & White
,
Gray (Error Diffusion)
or
True Gray
is
chosen.
Contrast
2
You can increase or decrease the
Contrast
level by moving the slide bar to the left or right. An increase
emphasizes dark and light areas of the image, while a decrease reveals more detail in gray areas. You can
also enter a value in the box to set the
Contrast
.
Note
The Contrast setting is only available when
Gray (Error Diffusion)
or
True Gray
is chosen.
When scanning photographs or other images for use in a word processor or other graphics application, try
different settings for the contrast and resolution to see which setting best suits your needs.
Document Size
2
Choose one of the following sizes:
A4 8.3 x 11.7 in (210
×
297 mm)
JIS B5 7.2 x 10.1 in (182
×
257 mm)
Letter 8 1/2
×
11 in (215.9 x 279.4 mm)
Legal 8 1/2
×
14 in (215.9 x 355.6 mm) (Available on ADF models)
A5 5.8
×
8.3 in (148 x 210 mm)
Executive 7 1/4
×
10 1/2 in (184.1 x 266.7 mm)
Business Card 2.4 x 3.5 in (60 x 90 mm)
To scan business cards, choose the
Business Card
size, and then place the business card face down in
the center of the left hand side of the scanner glass, as indicated by the document guidelines.
Photo 4
×
6 in (10 x 15 cm)
Index Card 5
×
8 in (127 x 203.2 mm)
Photo L 3.5
×
5 in (89 x 127 mm)
Photo 2L 5
×
7 in (13 x 18 cm)
Postcard 1 3.9 x 5.8 in (100 x 148 mm)
Postcard 2 (Double) 5.8 x 7.9 in (148 x 200 mm)