WSW21 - Page 288

 App. 

4-25 

Confidential

  Selectors 8:  Limitation on CNG detection 

If this selector is set to "1," the machine detects a CNG signal according to the condition preset by  
selectors 2 and 3 on WSW18 after a line is connected.  If it is set to "0," the machine detects a  
CNG signal as long as the line is connected. 

WSW21 

(TAD setting 1

) 

Selector 

No. 

Function 

Setting and Specifications 

1 

| 

5 

Max. waiting time for voice 
signal 

No. 

1 2 3 4 5 

  0 0 0 0 0  : 

No 

detection 

  0 0 0 0 1  : 

1 

sec. 

  0 0 0 1 0  : 

2 

sec. 

  0 0 0 1 1  : 

3 

sec. 

    |   

   | 

  0 1 0 0 0  : 

8 

sec. 

    |   

   | 

  1  1 1 1 1  : 

31 

sec. 

6 
7 

Taping the call 

No. 6  7 
 

0  0  : 

Enable (signaling for U.S.A.) 

0  1  : 

Enable (signaling for countries 
except U.S.A.) 

1  0  : 

Enable (without signaling) 

 1 

1 

: 

Disable 

8 

Erasure of message stored in 
the memory after the message 
transfer 

 0: 

Yes   1: 

No 

NOTE:

  Selectors 1 through 5 are applicable to models equipped with ICM recorders. 

NOTE:

  Selectors 6 and 7 are applicable to models with internal TADs. 

NOTE:

  Selector 8 is applicable to models equipped with TADs. 

  Selectors 1 through 5:  Max. waiting time for voice signal 

In the TAD mode, the machine waits for voice signal for the time length specified by these  
selectors before it automatically shifts to the facsimile message receive mode or disconnects the  
line. 

  Selectors 6 and 7:  Taping the call 

These selectors select whether or not to tape the call.  Setting them to "1, 0" enables taping the call  
without signaling to the calling station that the call is being taped. 

  Selector 8:  Erasure of message stored in the memory after the message transfer 

Setting this selector to "0" will erase the message recorded in the memory after the document  
retrieval feature transfers the message.