WSW46 ; NOTE: - Page 313

 App. 

4-50 

Confidential

WSW46 

(Monitor of power ON/OFF state and parallel port kept at high)

Selector 

No. 

Function 

Setting and Specifications 

1 
2 

Monitoring the PC ON/OFF 
state  
(Not used.) 

No. 1 2 

 0 

0 

: 

Disable 

0  1  :  Monitor SELECT IN 

 1 

0 

: 

Monitor 

STROBE 

1  1  :  Monitor both SELECT IN and 

STROBE 

3 

Parallel port output pins kept at 
high level  
(Not used.) 

0:  Enable 

1:  Disable 

4 

Previous filtering parameters for 
white level compensation 
(Not used.) 

0:  Enable 

1:  Disable 

5 

| 

8 

Not used. 

NOTE:  

Selector 4 is not applicable to models equipped with flat-bed scanners.

  Selectors 1 and 2:  Monitoring the PC ON/OFF state (Not used.) 

For the related functions, refer to WSW36, selectors 2 and 3. 

  Selector 3:  Parallel port output pins kept at high level (Not used.) 

Setting this selector to "0" will keep all parallel output pins of the machine at high level.  Use this  
setting if Resource Manager (bundled with MFC models) installed to WindowsNT running on the  
connected PC fails to monitor the power ON/OFF state of the machine. 

  Selector 4:  Previous filtering parameters for white level compensation (Not used.) 

At the start of scanning operation, the machine usually initializes white and black level data stored  
in the EEPROM by scanning the while-level reference film attached to the inside of the scanner  
top cover.  After long use of the machine, however, the film may be contaminated with dust or dirt.  
Accordingly, incorrect white level data will be set up so that white vertical streaks will be brought  
on the scanning result. 
Setting this selector to "0" (Enabled) will apply previously saved white level data instead of new  
incorrect compensation.