11 Control panel features; Overview; Printing the Printer Settings Page- Page 107

100

11

11

Overview

11

With the 

Go

 button on the control panel you can do the following:

Print the Printer Settings Page

11

See 

Printing the Printer Settings Page

 on page 100 for information on how to print the Printer Settings Page.

Restore the network settings to factory default

11

See 

Restoring the network settings to factory default

 on page 100 for information on how to restore the 

network settings to factory default.

Enable or Disable the wireless network (For HL-2170W)

11

See 

Enabling or disabling the wireless network (For HL-2170W)

 on page 101 for information on how to 

enable/disable the wireless network.

Printing the Printer Settings Page

11

Note

Node name: Node name appears in the Printer Settings Page. The default Node name of the network card 
in the printer is “BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless network.

The Printer Settings Page prints a report listing all the current printer settings including the network print 
server settings. You can print the Printer Settings Page using the 

Go

 button of the printer.

a

Make sure that the front cover is closed and the power cord is plugged in.

b

Turn on the printer and wait until the printer is in the Ready state.

c

Press 

Go

 three times within 2 seconds. The printer will print the current printer settings page.

Restoring the network settings to factory default

11

If you want to reset the print server back to its default factory settings (resetting all information such as the 
password and IP address information), please follow these steps:

a

Turn off the printer.

b

Make sure that the front cover is closed and the power cord is plugged in.

c

Hold down the 

Go

 button as you turn on the power switch. Keep the 

Go

 button pressed down until the 

Toner

, 

Drum

 and 

Error

 LEDs light up. Release the 

Go

 button. Make sure that all the LEDs turn off.

Control panel features

11