Using other methods to configure your printer for a network; Boot Method; Subnet Mask- Page 18

Configuring your printer for a network

11

2

c

Double-click the unconfigured device.

Note

• If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the 

device will appear as 

Unconfigured

 in the BRAdmin Light utility screen.

• You can find the node name and Ethernet address by printing out the Printer Settings Page. See 

Printing 

the Printer Settings Page

 on page 100.

d

Choose 

STATIC

 from 

Boot Method

. Enter the 

IP Address

, 

Subnet Mask

 and 

Gateway 

(if needed) of 

your print server.

e

Click 

OK

.

f

With the correctly programmed IP address, you will see the Brother print server in the device list.

Using other methods to configure your printer for a network

2

You can configure your network printer using other methods. See 

Other ways to set the IP address (for 

advanced users and administrators)

 on page 120.

Windows

®

Macintosh

®

Windows

®

Macintosh

®