Positioning the printer; Power supply; Environment- Page 12

About this Printer

4

1

Positioning the printer

1

Read the following before you use the printer. 

Power supply

1

Use the printer within the recommended power range.

The power cord, including extensions, should be no longer than 5 meters (16.5 feet).
Do not share the same power circuit with other high-powered appliances, such as an air conditioner, copier, 
shredder and so on. If you cannot avoid using the printer with these appliances, we recommend that you use 
a voltage transformer or a high-frequency noise filter. 
Use a voltage regulator if the power source is not stable. 

Environment

1

„

Put your printer on a flat, stable surface such as a desk that is free of vibration and shocks.

„

Put the printer near an AC power outlet, so that it can be easily unplugged from the AC power outlet if there 
is an emergency.

„

Only use the printer within the following ranges of temperature and humidity:
Temperature: 10

°

C to 32.5

°

C (50

°

F to 90.5

°

F)

Humidity: 20% to 80% (without condensation)

„

Use the printer in a well-ventilated room.

„

DO NOT put the printer where the ventilation hole of the printer is blocked. Keep a gap of roughly 100 mm 
(4 in.) between the ventilation hole and the wall.

„

DO NOT expose the printer to direct sunlight, excessive heat, moisture, or dust. 

„

DO NOT put the printer near devices that contain magnets or produce magnetic fields.

„

DO NOT expose the printer to open/naked flames or salty or corrosive gasses. 

„

DO NOT put objects on top of the printer. 

„

DO NOT put the printer near heaters, air conditioners, water, chemicals or refrigerators.

„

Keep the printer horizontal when you carry it.

Power source:

USA and Canada:

AC 110 to 120 V, 50/60 Hz

Europe and Australia:

AC 220 to 240 V, 50/60 Hz