Network default settings (HL-2150N / HL-2170W only); Using the Go button- Page 67

Control Panel

59

4

Network default settings (HL-2150N / HL-2170W only)

4

If you want to reset the print server back to its default settings (resetting all information such as the password 
and IP address information), follow these steps:

Using the Go button

4

a

Turn off the printer.

b

Make sure that the front cover is closed and the power cord is plugged in.

c

Hold down the 

Go

 button as you turn on the power switch. Keep the 

Go

 button pressed down until the 

Toner

,

 Drum

 and 

Error

 LEDs light up. Release the 

Go

 button. Make sure that the 

Toner

, 

Drum

 and 

Error

 LEDs are off.

d

Press the 

Go

 button seven times. Make sure that all the LEDs light up to indicate the print server has 

been reset to its default settings.