Environment; Environment - Page 32

CHAPTER 1 INTRODUCTION 

1-14

The power cord, including extensions, should not exceed 5 meters (16.5 
feet).  

Do not share the same power circuit with other high-power appliances, 
particularly an air conditioner, copier, shredder, etc. If you must use the 
printer with these appliances, we recommend that you use a voltage 
transformer or a high-frequency noise filter.  

Use a voltage regulator if the power source is not stable.  

Environment 

Use the printer only within the following ranges of temperature and 
humidity. 

  Ambient temperature: 

10°C to 32.5°C (50°F to 90.5°F) 

  Ambient humidity:  20% to 80% (without condensation)  

Do not block the air exit on top of the printer. Do not place objects on top of 
the printer, especially on the air exit.  

Ensure that the printer Ozone Filter is installed at all times. 

Ventilate the room where you use the printer. 

Do not place the printer where it will be exposed to direct sunlight. Use 
blinds to protect the printer from direct sunlight if set up near a window is 
unavoidable. 

Do not install the printer near devices that contain magnets or generate 
magnetic fields. 

Do not subject the printer to strong physical shocks or vibrations. Do not 
expose the printer to open flames or salty or corrosive gasses.  

Place the printer on a flat, horizontal surface.  

Keep the printer clean. Do not install the printer in a dusty place.  

Do not install the printer near an air conditioner. 

Do not install the printer in a room with a humidifier.