Error Message- Page 133

Troubleshooting and routine maintenance

119

Toner Life 
End

The toner cartridge and drum unit 
assembly is not installed properly, 
or the toner cartridge is used up 
and printing is not possible.

Do one of the following:

„

Re-install the toner cartridge and drum unit 
assembly.

„

Replace the toner cartridge with a new one. 
(See 

Replacing the toner cartridge 

(TN-550/TN-580)

 on page 132.)

Toner Low

If the LCD shows 

Toner Low

, you 

can still print; however, the 
machine is telling you that the toner 
cartridge is near the end of its life 
and the toner will soon run out.

Order a new toner cartridge now.

Too Many 
Trays

More than one optional tray is 
installed.

The maximum number of optional trays is one. 
Remove any additional trays.

Unable to 
Init.

(Initialize)

Unable to 
Print

The machine has a mechanical 
problem.

Turn off the machine

’

s power switch and then 

turn it on again. If the error message continues 
leave the machine for several minutes and then 
try it again. (The machine can be turned off for 
up to 4 days without losing faxes stored in the 
memory. See 

Checking if the machine has faxes 

in its memory

 on page 120.)

Unable to 
Scan

The machine has a mechanical 
problem.

Turn off the machine's power switch and then 
turn it on again. If the error message continues 
leave the machine for several minutes before 
you try it again. (The machine can be turned off 
for up to 4 days without losing faxes stored in the 
memory. See 

Checking if the machine has faxes 

in its memory

 on page 120.)

Document is too long for duplex 
scanning.

Press 

Stop/Exit

. Use a suitable size of paper for 

duplex scanning. See 

Scan

 on page 163.

Error Message

Cause

Action