Introduction; Follow these guidelines to avoid fire, electric shock, or other damage.- Page 10

Introduction

10

Do not use paint thinner, benzene, 
alcohol or any other organic solvents to 

clean the machine. Doing so may cause 

damage to the surface finish. Use a soft, 
dry cloth to clean the machine.
Do not put any heavy objects or objects 

containing water on top of the machine. 

If water or any foreign object enters the 
machine, contact the retail outlet where 

the machine was purchased or your 

local authorized service center. If you 
continue to use the machine with water 

or a foreign object in the machine, the 

machine may be damaged or personal 
injury could result.

The electrical outlet should be close to 
the machine and be easily accessible.
Do not touch the cutter. Personal injury 

could result.
Do not expose the machine to direct 

sunlight or near heaters or other hot 
appliances, in any area exposed to 

extremely high or low temperatures, 

high humidity or dusty areas. Doing so 
could cause the machine to malfunction.

Follow these guidelines to avoid fire, electric shock, or other damage.

„

Power Cord 

Use only the authorized power source 

(120V AC) for the machine.
Use only the power cord included with 

the machine.
Do not handle the power cord or plug if 
your hands are wet.
Do not overload the electrical outlet 

sockets with too many appliances or 

plug the power cord into a damaged 
electrical outlet.
Do not cut, damage, alter or place heavy 

objects on the power cord.

Do not use the power cord if it is 

damaged. 
Ensure the power cord is correctly 

inserted into the electrical outlet. 
Always hold the power cord when 
unplugging the power cord from or 

plugging it into electrical outlet. Do not 

pull on the power cord. The wire in the 
electrical cord may become damaged.
If the machine will not be used for an 

extended period, remove the power cord 

from the electrical outlet.

„

Cutter

Do not touch the blade of the cutter. 

Do not open the top cover when the 

cutter is operating.

CAUTION

Follow these guidelines to avoid fire, electric shock, or other damage.

„

Installation/Storage 

Put the machine on a flat, stable surface 
such as a desk.

Do not put any heavy objects on top of 
the machine. 

WARNING