Attaching the paper guide; 4 Attaching the paper guide- Page 24

STEP1 Before using the printer

24

The printer contains a paper guide which can hold up to 10 individual label sheets.

5

Push down the roll release lever and close the 

DK Roll cover.

If the DK Roll edge cannot be pushed in just before the 

cutter (as described in step 4), insert the edge of the DK 

Roll as far as possible and pull down the release lever. 
When finished, close the DK Roll cover.

Pressing the Feed button feeds the DK Roll to the 

correct position (when using DK Tape, cut the fed tape 
as needed).

1

As shown in the right hand 

ilustration, attach the paper 

guide to the front face of the 

printer.

When printing more than 10 

labels continuously using the 
auto cut function, remove the 

paper guide to prevent a paper 

jam.

4 Attaching the paper guide

Paper guide