Turn Signal On Chime; Turn and Lane Change Indicator; Headlamp High/Low Beam Changer- Page 91

yellow

blue     

2-35

Turn and Lane Change Indicator

The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow you
to signal a turn or a lane change.

To signal a turn, move the lever all the way up or 
down. When the turn is finished, the lever will 
return automatically.

An arrow on the instrument
panel will flash in the
direction of the turn or 
lane change.

To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by
itself when you release it.

If the arrows just stay on and don’t flash as you signal a
turn or a lane change, a signal bulb may be burned out
and other drivers won’t see your turn signal.

If a bulb is burned out, replace it to help avoid an
accident. If the arrows don’t go on at all when you
signal a turn, check the fuse (see “Fuses and Circuit
Breakers” in the Index) and for burned

-

out bulbs.

Turn Signal On Chime

If your turn signal is left on for more than 3/4 of a mile
(1.2 km), a chime will sound at each flash of the turn
signal. To turn off the chime, move the turn signal lever
to the off position.

Headlamp High/Low Beam Changer

To change the headlamps from low beam to high beam
or high beam to low beam, pull the turn signal lever
toward you and release it.

When the high beams are
on, this light on the
instrument panel will 
also be on.