How to Add Coolant to the Radiator- Page 258

5-17

A. Clean the area around the engine oil fill tube and cap

before removing. Twist the oil fill tube, with cap
attached, counterclockwise and remove it.

B. If you have the supercharged engine, remove the nut

in the center of the cover shield.

C. Lift the engine cover shield at the front, slide the

catch tab out of the engine bracket and remove the
cover shield.

D. Put the oil fill tube, with cap attached, in the valve

cover oil fill hole until you’re ready to replace the
cover shield.

There is one 
bleed valve. It is
located on the
thermostat housing.

4. After the engine cools, open the coolant air 

bleed valve.