2-16
Before your vehicle was shipped from the factory, it was
programmed in Mode 3. The mode to which the vehicle
has been programmed may have been changed since it
left the factory. To determine the mode to which your
vehicle is programmed or to program your vehicle to a
different mode, do the following:
1. Follow the instructions for “Entering Programming
Mode” listed previously.
2. Turn the exterior lamp control from the off position
to the parking lamp position.
3. Count the number of chimes you hear. The number of
chimes indicates the vehicle’s current programmed
mode. If you do not wish to change the current mode,
you can either exit the programming mode by
following the instructions later in this section or
program the next feature available on your vehicle.
4. Turn the exterior lamp control from the off position to
the parking lamp position to change the current mode.
5. Turn the exterior lamp control from the off position
to the parking lamp position until you hear the
number of chimes corresponding to the mode
selection you want.
The mode you selected is now set. You can either exit
programming mode by following the instructions later in
this section or program the next feature available on
your vehicle.
Automatic Door Lock/Unlock
This feature allows you to lock and unlock your
doors automatically.
Programmable Modes
Mode 1: Both Features Off (Automatic door locking
and unlocking is disabled. You will always need to
lock your doors manually before driving to increase
occupant safety.)
Mode 2: Automatic Door Locking Only
D
Shift out of PARK (P) with the ignition on and the
driver’s door closed; all doors will lock automatically.
D
The automatic door unlock feature is turned off.
Mode 3: Automatic Door Locking with shift out
of PARK (P)/Driver’s Door Unlocking with shift
into PARK (P)
D
Shift out of PARK (P) with the ignition on and the
driver’s door closed; all doors will lock automatically.
D
Shift into PARK (P) with the ignition on; driver’s
door only will unlock automatically.