Turn Signals; Outboard Taillamps, Brake Lamps and- Page 384

6-39

6. Turn the bulb socket one

-

quarter of a turn

counterclockwise.

7. Pull the bulb assembly out from the lamp housing.

8. Pull the bulb out of the base.

9. Install the new bulb into the electrical connector.

Push the bulb firmly enough so that the tabs hook
over the tab on the bulb.

10. Carefully put the bulb assembly back into the lamp

housing and turn the bulb socket one

-

quarter of a

turn clockwise.

11. Replace the applique on the liftgate.

12. Gently lift the liftgate.

13. Reinstall the seven wing nuts and the 

four outboard nuts.

14. Reinstall the panel inside the liftgate by connecting

the tabs.

15. Close the liftgate.

Outboard Taillamps, Brake Lamps and
Turn Signals

1. Open the liftgate.

2. Remove the 

two screws on 
the inboard 
taillamp panel.