Removing the Stowable Seat- Page 26

1-19

Push and pull on the seatback to make sure that it is
locked into place.

To raise the seatback, do one of the following:

D

From the rear of the vehicle, pull up on the lever to
release the seatback, then pull the strap, located on
the right side of the seat, to pull the seatback up. 
The seatback has a pocket to stow the strap on the
side of the seatback when not in use, or

D

from the passenger’s side door, pull up on the lever
to release the seatback, then push up on the seatback
to raise the seat.

Push and pull on the seatback to make sure that it is
locked into the upright position.

Removing the Stowable Seat

1. Remove the convenience center, if it is in the

vehicle. See “Rear Convenience Center” in the 
Index for more information.

2. Make sure all items are off of the stowable seat.

3. If the seatback is down, put the seatback in 

its upright position before removing the seat. 
See “Folding the Seatback” listed previously.

4. From in front of the bench seat, remove the two nuts

located on the floor on each side of the bench seat.

5. From behind the bench seat, fold the seatback down.

6. Remove the nuts located on the floor on each side 

of the bench seat.

7. Remove the seat by rocking it slightly toward the rear

of the vehicle and then pulling it out through the rear
of the vehicle. This should be done in one motion.

8. Put the nuts back onto the screws so the nuts do 

not get misplaced.