Unlock Feedback- Page 206

2-118

Unlock Feedback

The unlock feedback feature can be programmed to one
of the following modes:

LIGHTS: This mode does the following:

D

During the day, when the ignition is in OFF and
UNLOCK on the remote keyless entry transmitter 
is pressed, the headlamps and parking lamps will
flash, or

D

during the night, when the ignition is in OFF and the
headlamp exit delay feature is programmed to any
mode but OFF, the headlamps and parking lamps
will be activated for the same time period as the
headlamp exit delay feature is programmed to when
UNLOCK is pressed on the remote keyless entry
transmitter (see “Headlamp Exit Delay” earlier in
this section), or

D

during the night, when the ignition is in OFF and the
headlamp exit delay feature is programmed to OFF,
the headlamps and parking lamps will be activated
for 30 seconds when UNLOCK is pressed on the
remote keyless entry transmitter (see “Headlamp
Exit Delay” earlier in this section).

OFF: The headlamps and parking lamps will not 
flash when UNLOCK is pressed on the remote keyless
entry transmitter.

Before your vehicle was shipped from the factory, it was
programmed in LIGHTS. The mode to which the
vehicle has been programmed may have been changed
since it left the factory. To determine the mode to which
your vehicle is programmed or to program your vehicle
to a different mode, do the following:

1. Follow the instructions for “Entering Programming

Mode” listed previously.

2. Follow the instructions for programming

HEADLAMP EXIT DELAY earlier in this section,
to make sure which mode it is programmed to.

3. Press the SET button until UNLOCK FEEDBACK

appears on the DIC.

4. Press the MODE button until the arrow is before

LIGHTS or OFF.

5. Press the SET button once you have determined

which mode you prefer.

The mode you selected is now set. You can either exit
programming mode by following the instructions later in
this section or program the next feature available on
your vehicle.