Garage Door Opener Compartment- Page 148

2-60

Garage Door Opener Compartment

You can store and operate your garage door opener in
the overhead console. To install your garage door
opener, follow these instructions:

1. Open the compartment by pressing the latch forward.

2. Remove the garage door opener button, by pressing

the tabs and pulling it down.

3. Remove the piece of self

-

sticking Velcro

R

 from the

top of the garage door opener compartment.

4. Peel the protective backing from the Velcro 

and press it firmly to the back of your garage 
door opener.

5. Line up the button on the garage door opener with

the opening in the storage compartment door. Make
sure the garage door opener button is facing down
and then press the opener firmly into the garage door
opener compartment.

6. Once the opener is installed, remove the three pegs

from the garage door opener button. Each peg is a
different size.

7. Put the garage door opener button back in by

inserting the tabs into the slot in the garage door
opener compartment and test the peg.

8. Repeat this procedure until the correct peg length is

pressing the garage door opener button with the
compartment door closed.