FUEL RANGE:; FUEL USED:; AVG SPEED:- Page 195

2-107

FUEL RANGE: The fuel range is an estimated 
distance that your vehicle can travel on the remaining
fuel. The fuel economy used to calculate the range is
based on your driving history since the last reset of the
average speed.

FUEL USED: The fuel used display will show you how
much fuel has been used since the last time it was reset.
To reset the fuel used to zero, press and hold the SET
button while the fuel used is displayed on the DIC and
until the display goes to zero.

AVG SPEED: The average speed display will show you
your average speed from when you first started your
vehicle. To reset the average speed, press and hold the
SET button while the average speed is displayed on the
DIC and until the speed resets to your current speed.

OIL LIFE LEFT HOLD SET TO RESET: This
message displays the current percentage of the GM Oil
Life System

t

. Be careful not to reset this display other

than when the oil has been changed. See “How to Reset
the Change Engine Oil Message” in the Index.

TIRE PRESSURE: The check tire pressure system can
alert you to a large change in the pressure of one tire.
The system will not alert you before you drive that a tire
is low or flat. You must begin driving before the system
will work properly. See “Check Tire Pressure System”
in the Index.

USE SET TO SELECT ENGLISH METRIC: You
can use this display to select English or metric. Press the
SET button to toggle between English or metric. The
DIC, the odometer, the trip odometer and if your vehicle
has the optional head

-

up display will change.

OFF: No driver information will be displayed in this
mode. If the DIC is left in this mode for more than three
seconds, the display will turn off. Press the MODE
button to start the DIC.