ERROR MESSAGE - Page 191

Confidential

9-3

ERROR MESSAGE 

CAUSE 

ACTION 

Machine too Hot 

The inside of the machine is too  
hot. 

Make sure that the fan in the MFC is  
spinning and the exhaust outlet is not  
blocked by something.  If the fan is  
spinning, remove some obstacles  
around the exhaust outlet, and then  
leave the MFC turned on but do not use 
it for several minutes.  If the fan is not  
spinning, you need to save the faxes  
before you follow the suggestions  
below.  Then, turn off the MFC and 
then on again. 

No Cartridge 

The toner cartridge is not installed 
properly. 

Reinstall the toner cartridge. 

The MFC is out of paper or paper  
is not properly loaded in the paper  
tray. 

Refill the paper in the paper tray. 

—OR— 

Remove the paper and load it again. 

No Paper Fed 

The paper is jammed in the MFC. 

Remove the jammed paper.

No Response/Busy 

The number you dialed does not  
answer or is busy. 

Verify the number and try again. 

Not Registered 

You tried to access a One-Touch  
or Speed Dial number that is not  
programmed. 

Set up the One-Touch or Speed Dial  
number. 

Out of Memory 

The MFC’s memory is full. 

(Fax sending or copy operation in  
progress) 
Press 

Start

 to send or copy the scanned 

pages. 

—OR— 

Press 

Stop/Exit 

and wait until the other  

operations in progress have finished  
and then try again. 

—OR— 

Clear the faxes from the memory. 
(Printing operation in process) 
Reduce print resolution. 
(See Advanced tab

in Software User’s  

Guide on the CD-ROM.) 

—OR— 

Clear the faxes from the memory. 

Paper Jam Inside 

The paper is jammed inside the  
MFC. 

Remove the jammed paper.

Paper Jam Rear 

The paper is jammed in the back  
of the MFC. 

Remove the jammed paper.

Paper Jam Tray 

The paper is jammed in the paper  
tray of MFC. 

Remove the jammed paper.