Selectors 6 through 8: Extension of incoming calling signal (CI) frequency band specified by ; selectors 1 through 4 on WSW14 ; Printout of the stored image data of an unsent document onto an error report - Page 304

Brother DCP7025 User Manual

2014 Dodge Charger SRT Owner Manual

Table of Contents

ALLFB SERVICE MANUAL
TABLE OF CONTENTS
background image

 App. 

4-41 

Confidential

 

 

Selectors 6 through 8:  Extension of incoming calling signal (CI) frequency band specified by 

selectors 1 through 4 on WSW14 

At the start of reception, if the machine detects the frequency of a CI signal specified by selectors  
1 through 4 on WSW14, it starts the ringer sounding.  However, the machine may fail to detect the  
CI signal normally due to noise superimposed at the time of reception.  To prevent it, use selectors  
6 through 8 on WSW36. 

If the machine detects higher frequencies than the setting made here, it regards them as noise and  
interprets the detecting state as being normal, allowing the ringer to keep sounding according to  
the preset number of ringers (until it starts automatic reception of FAX data in the FAX mode or  
enters the TAD mode in the TEL mode). 

 

 

WSW37 

(Function setting 15)

 

Selector 

No. 

Function 

Setting and Specifications 

Printout of the stored image 
data of an unsent document 
onto an error report 

 0: 

No 

1: 

Yes 

Erasure of the stored image 
data of an unsent document at 
the time of the subsequent in-
memory message transmission 

 0: 

No 

1: 

Yes 

Not used. 

 

 

  Selector 1: 

Printout of the stored image data of an unsent document onto an error report 

This selector determines whether or not to print out the 1st-page image data of a document onto  
the error report if the document image data stored in the temporary memory cannot be transmitted  
normally. 

  Selector 2: 

Erasure of the stored image data of an unsent document at the time of the subsequent 
in-memory message transmission 

If in-memory message transmission fails repeatedly when selector 1 is set to "1," the temporary  
memory will be occupied with image data.  Setting selector 2 to "1" will automatically erase the  
stored 1st-page image data of an unsent document at the time of the subsequent in-memory  
message transmission only when recording paper or toner runs out. 

 

Detailed Information for Brother DCP7025 User Manual

Lists of information found in Brother DCP7025 User Manual - Page 304

  • 36. If the machine detects higher frequencies than the setting made here, it regards them as noise and interprets the detecting state as being normal, allowing the ringer to keep sounding according to the preset number of ringers (until it starts automatic reception of FAX data in the FAX mode or enters the TAD mode in the TEL mode).

Related Documents for Brother DCP7025 User Manual