Setup TCP/IP; Server - Page 25

3 - 2 FRONT PANEL SETUP

NC9100h_FM6.0

Setup TCP/IP

This menu has nine sections: BOOT Method, IP Address, Subnet 
Mask, Gateway, Host Name, WINS Config, WINS Server, DNS 
Server and APIPA.

BOOT Method

1

Press 

Menu/Set

, 

4

, 

1

, 

1

. 

2

Press 

 or 

 to select 

Auto

, 

Static

, 

RARP

, 

BOOTP

 or 

DHCP

.

3

Press 

Menu/Set

.

4

Press 

Stop/Exit

.

Static mode
In this mode the machine

’

s IP address must be manually assigned. 

Once entered the IP address is locked to the assigned address.

Auto mode
In this mode, the machine will scan the network for a DHCP server, 
if it can find one, and if the DHCP server is configured to allocate an 
IP address to the machine, then the IP address supplied by the 
DHCP server will used. If no DHCP server is available, then the 
machine will scan for a BOOTP server. If a BOOTP server is 
available, and it is configured correctly, the machine will take its IP 
address from the BOOTP server. After it is initially powered ON, it 
may take a few minutes for the machine to scan the network for a 
server.