Brother Internet Print Using BRAdmin Professional utility to Configure the Print Server; Brother Internet Print ; Using BRAdmin Professional utility to Configure - Page 68

CONFIGURING INTERNET PRINTING FOR WINDOWS

®

 7 - 4

NC9100h_FM6.0

Brother Internet Print 
Using BRAdmin Professional utility to Configure 
the Print Server

The steps required to configure the Print/Fax server to receive print 
jobs from a Windows

®

 98/Me/2000/XP. PC running the BIP software 

is as follows:

1

Start BRAdmin Professional utility.

2

Select the node name of the desired Brother Print/Fax server 
from the list and double click on it. (the default node name is 
usually 

BRN_xxxxxx

, where 

xxxxxx

 is the last six digits of the 

Ethernet address (MAC address)). You will be prompted for a 
password; the default password is 

access

.

3

Click on the POP3/SMTP tab.

4

Enter the address of the POP3 server (consult your network 
administrator if you do not know this address).

5

Enter the mailbox name for the remote Brother Print/Fax server. 
Usually this will be the first part of the E-mail address (for 
example, if the E-mail address of the print server is 

emailprinter@xyz

, then the mailbox name would be 

emailprinter

).

6

Enter the password for the mailbox, if any.

7

The Print/Fax server is configured by default to poll the POP3 
server every 30 seconds. You may change this value, if desired.

Using the BRAdmin Professional utility, you can configure 
the Brother print server using the TCP/IP protocol.

You can find the node name and MAC address by printing 
out the machine configuration page. Refer to this user’s 
guide chapter 3 for information on how to print the 
configuration page on your Print/Fax server.