TCP/IP Printing; Installing the Brother Peer to Peer Software; Network Print Software- Page 47

4 - 5 NETWORK PRINTING FROM WINDOWS

® 

(Peer to Peer)

NC9100h_FM6.0

TCP/IP Printing

Brother’s Peer to Peer printing software requires the TCP/IP protocol 
to be installed on your Windows

®

 peer-to-peer computers and an IP 

Address has to be defined for the Print/Fax server. Refer to your 
Windows

®

 documentation for more information on how to configure 

the TCP/IP protocol on your Windows

®

 PC.

If you haven't already done so, configure the IP address of the 
machine, for more information on IP address configuration, refer to 
chapter 2 of this user guide. 

Installing the Brother Peer to Peer Software

1

Visit http://solutions.brother.com and select the model to 
download the software. From download menu, select Utilities to 
find out Network Print Software.

2

Click it to download the software. After download completed, 
open the file to start the Brother Network Print Software 
installation program.

3

Push the Next button in response to the Welcome message.

4

Select the Brother Peer to Peer Print (LPR) button.

5

Select the desired directory to install the Brother Peer to Peer 
Print (LPR) files and push Next. The installation program will 
create the directory for you if it does not already exist on your 
disk.

6

Enter the Port name that you wish to use and click OK. The 
default port name is BLP1. Whichever name you choose, it must 
be unique and it MUST begin with BLP.