Windows® 2000/XP Printing (Printer Driver already installed); Windows ; Standard TCP/IP Port- Page 45

4 - 3 NETWORK PRINTING FROM WINDOWS

® 

(Peer to Peer)

NC9100h_FM6.0

9

Windows

®

 2000/XP will now contact the printer that you 

specified. If you did not specify the correct IP address or name 
then you will receive an error message.

10

Click the Finish button to complete the Wizard.

11

Now that you have configured the port, you must specify which 
printer driver you wish to use. Select the appropriate driver from 
the list of supported printers. You can also click the Windows 
Update button to connect directly to Microsoft's support Web 
site to download printer drivers.

12

When the driver is installed, click the Next button.

13

Specify a name and click the Next button.

14

Now specify if you wish to share the printer, enter the share 
name and click Next.

15

Continue through the Wizard clicking the Finish button when 
complete.

Windows

®

 2000/XP Printing 

(Printer Driver already installed)

If you have already installed the printer driver and wish to configure 
it for network printing, follow these steps:

1

Select the printer driver you wish to configure.

2

Select File and then choose Properties.

3

Click the Ports tab of the driver and click Add Port.

4

Select the port that you wish to use. Typically this would be 
Standard TCP/IP Port. Then click the New Port... button.

5

The standard TCP/IP Port Wizard will start. Follow steps 6-10 
of the “Standard TCP/IP Port Printing” section.