Connection ; You have completed the wireless setup. To in; Searching or accessing - Page 89

Wireless configuration using the PIN Method of Wi-Fi Protected Setup™ (For HL-2170W)

82

7

d

Wait for the 

Ready

 LED (

Go

 button) of your printer to indicate connection succeeded. (See the table 

below) This indication means the machine has successfully connected to your access point / router. You 
can now use your printer on the wireless network.

If the LED indicates connection failed (See the table below), the machine has not successfully connected 
to your router or access point. Try starting from 

a

 again. If the same message is indicated again, reset 

the machine back to the default factory settings and try again. For resetting, see 

Restoring the network 

settings to factory default

 on page 100.

1

The LED will blink (turn on for 0.2 seconds and off for 0.1 second).

2

The LED will turn on for 5 minutes.

3

The LED will blink (turn on for 0.1 second and off for 0.1 second) for 30 seconds.

You have completed the wireless setup. To install the printer driver, Go to step 

a

 on page 83 

for Windows

®

 or page 87 for Macintosh

®

.

 LED indications when using the one-push wireless setting mode

LEDs

Searching or accessing 

the access point

1

Connecting and 

downloading the settings 

from the access point

1

Connection 

succeeded

2

Connection failed

3

Toner

(Yellow)

Drum

(Yellow)

Error

(Red)

Ready

(Blue)