Job Spooling; Use Reprint; Quick Print Setup- Page 43

Driver and Software

35

3

„

Job Spooling

The printer keeps the last print job sent to it in memory.
To reprint the last document, press the 

Go

 button and hold it down for about 4 seconds until all the LEDs 

light up in order (

Toner

, 

Drum

, 

Error

, 

Ready

), and then release the 

Go

 button. Within 2 seconds press 

the 

Go

 button the number of times you want to reprint. If you don’t press the 

Go

 button within 2 seconds, 

a single copy will be printed.

Note

If you want to prevent other people from printing your data using the reprint function, uncheck the 

Use Reprint

 check box in the job spooling settings.

„

Quick Print Setup

This feature allows you to quickly choose driver settings by clicking a tasktray icon.
You can turn the quick print setting on or off. By placing a check in the selection boxes for the following 
functions you can choose which will be available in the quick print setting.

• Multiple Page
• Manual Duplex
• Toner Save Mode
• Paper Source
• Media Type

„

Sleep Time

When the printer does not receive data for a certain period of time, it enters sleep mode. In sleep mode, 
the printer acts as though it were turned off. When you choose 

Printer Default

, the timeout setting has 

been set to a specific time set at the factory, this can be altered in the driver. Intelligent Sleep Mode 
automatically adjusts to the most suitable timeout setting depending on the frequency of your printer use. 
While the printer is in sleep mode, the 

Ready

 LED lights up slightly, but the printer can still receive data. 

Receiving a print file or document or pressing the 

Go

 button will automatically wake up the printer to start 

printing.
To turn sleep mode off, from the 

Advanced

 tab, click the 

Device Options

 icon and choose 

Sleep Time

. 

Double-click the word 

Sleep Time

, and the Sleep Time Off function will appear. Click 

Off

 to stop the printer 

going into sleep mode. The Sleep Time Off function can be hidden by double-clicking the word Sleep Time 
again. We recommend that you keep sleep mode on for power saving.

„

Macro (

HL-2150N

 / 

HL-2170W

 only)

You can save a page of a document as a macro to the printer's memory. You can also execute the saved 
macro (you can use the saved macro as an overlay on any document). This will save time and increase 
printing speed for often used information such as forms, company logos, letterhead formats or invoices.