Delayed Exit Lighting; Perimeter Lighting; Personal Choice Programming- Page 113

2-48

Delayed Exit Lighting

If it is dark enough outside when you remove the 
key from the ignition, the interior lamps will turn on 
and stay on for approximately 25 seconds. This will 
give you time to find the door pull handle or lock
switches. Once the key is inserted into the ignition 
the exit lighting will be cancelled and the lighting will
theater dim.

Perimeter Lighting

If it is dark enough outside when the button with the
unlock symbol on the remote keyless entry transmitter 
is pressed, the DRL headlamps, parking lamps and
back

-

up lamps will come on.

Personal Choice Programming

This feature can be programmed in the on or off mode
for each transmitter.

To turn the feature off do the following:

1. Close all the doors and turn the ignition on. Keep all

doors closed throughout this procedure.

2. Press and hold LOCK on the power door lock switch

throughout this procedure. All the doors will lock.

3. Press the instant alarm on the transmitter. Perimeter

lighting remains on at this time and the horn will
chirp two times.

4. Press the instant alarm on the transmitter again.

Perimeter lighting is disabled and the horn will chirp
one time.

5. Release the door lock switch. The perimeter lighting

feature is now off.

To turn the feature on do the following:

1. Close all the doors and turn the ignition on. Keep all

doors closed throughout this procedure.

2. Press and hold LOCK on the power door lock switch

throughout this procedure. All the doors will lock.

3. Press the instant alarm on the transmitter. Perimeter

lighting now remains off at this time and the horn
will chirp one time.

4. Press the instant alarm on the transmitter again.

Perimeter lighting is now enabled and the horn will
chirp two times.

5. Release the door lock switch. The perimeter lighting

feature is now on.