What to Add; If you have too much brake fluid, it can spill on; the engine. The fluid will burn if the engine is - Page 298

6-28

So, it isn’t a good idea to “top off” your brake fluid.
Adding brake fluid won’t correct a leak. If you add fluid
when your linings are worn, then you’ll have too much
fluid when you get new brake linings. You should add
(or remove) brake fluid, as necessary, only when work is
done on the brake hydraulic system.

CAUTION:

If you have too much brake fluid, it can spill on
the engine. The fluid will burn if the engine is 
hot enough. You or others could be burned, 
and your vehicle could be damaged. Add brake
fluid only when work is done on the brake
hydraulic system.

When your brake fluid falls to a low level, your brake
warning light will come on. A chime will sound if you
try to drive with this warning light on. See “Brake
System Warning Light” in the Index.

What to Add

When you do need brake fluid, use only DOT

-

3 brake

fluid. Use new brake fluid from a sealed container only.
Refer to “Recommended Fluids and Lubricants” in the
Maintenance Schedule.

Always clean the brake fluid reservoir cap and the area
around the cap before removing it. This will help keep
dirt from entering the reservoir.

CAUTION:

With the wrong kind of fluid in your brake
system, your brakes may not work well, or they
may not even work at all. This could cause a
crash. Always use the proper brake fluid.