Temperature Button; Fan Button; Mode Controls- Page 164

3-5

Sun and temperature sensors automatically adjust the air
temperature, the airflow direction and the fan speed to
maintain your comfort setting. The system may supply
cooler air to the side of the vehicle toward the sun. 
Be careful not to put anything over the sensor on top 
of the dash.

Temperature Button

To adjust the comfort level you want maintained inside
the vehicle, push the TEMP button. If you want a
warmer comfort level, push the up arrow. If you want 
a cooler comfort level, push the down arrow. Your
comfort setting is shown in the display. The display 
will then return to the outside temperature.

Fan Button

The speed of the blower fan is controlled automatically
if you have the system set for AUTO. Pressing the 
FAN button will display and hold the current blower 
fan setting.

If you want the blower fan to run at a lower speed, push
the bottom of the FAN button. The fan speed will
decrease with every push of the button until the lowest
speed is reached. If you want to increase the fan speed,
push the top of the FAN button. Notice the fan
indicators in the display.

Mode Controls

Press the AIR FLOW button to deliver air through the
floor, middle or windshield outlets. The system will stay
in the selected mode until the AUTO button is pushed.
Use the up and down arrows on the AIR FLOW button
to cycle through the available modes.

Automatic Operation

Press the AUTO button when you want the system to
automatically adjust to changes in the temperature inside
the vehicle, the outside temperature and the sun load on
the vehicle. When the system is set for automatic
operation, air will come from the floor, middle or
windshield outlets depending on the temperature inside
the vehicle, the outside temperature and sun load. Fan
speed will vary as the system gets to and maintains the
comfort setting you have selected through the use of the
TEMP button.

To find your comfort setting, start with the system in
AUTO mode and the TEMP button adjusted to 75

_

F

(24

_

C), give the vehicle about 20 minutes to stabilize,

and adjust your comfort setting if necessary, by using
the TEMP button. The display will show the comfort
setting for a few seconds and then it will display the
outside temperature. If you want to see your current
automatic fan speed, airflow direction and comfort
setting, press the AUTO button.