Security Feedback; Mode 1:; Mode 2:- Page 78

2-13

Security Feedback

This feature provides feedback to the driver when the
vehicle receives a command from the remote keyless
entry transmitter. Feedback is only provided if all doors
are closed, the ignition is off and the Retained
Accessory Power (RAP) is inactive. One of the
following modes may be selected for each transmitter:

Mode 1: No feedback when locking or 
unlocking vehicle.

Mode 2: Parking lamps, back

-

up lamps and the 

DRL exterior lamps will flash twice when unlocking 
the vehicle and flash once when locking the vehicle.

Mode 3: Horn chirps when all doors are unlocked
(second time the button is pressed) and when locking 
the vehicle.

Mode 4: Parking lamps, back

-

up lamps and the DRL

exterior lamps will flash twice each time the button with
the unlock symbol is pressed; the horn chirps when 
all doors are unlocked. Parking lamps and the DRL
exterior lamps flash once and the horn chirps when
locking the vehicle.

Feedback will be provided according to the mode that
has been selected. The exterior lamps will not flash if
the manual parking lamps are on.

To change to another mode, do the following:

1. Close all the doors and turn the ignition on. Keep all

doors closed throughout this procedure.

2. Press and hold LOCK on the driver’s power door lock 

switch throughout this procedure. All the doors will lock.

3. Press the trunk button on the transmitter. The

security feedback will remain in its current mode.
The horn will chirp as feedback.

4. Press the trunk button again. Each time the trunk

button is pressed, the security feedback will advance
to the next mode, and the horn will chirp.

5. Release the power door lock switch. The security

feedback will remain in the most current mode selected.

This procedure only changes the mode for the
transmitter used to change this setting. The procedure
will need to be repeated for the second transmitter.

To verify the mode selected, remove the key from the
ignition and close all of the doors after you’ve exited the
vehicle. Press the lock button on the transmitter to be
verified and confirm the appropriate feedback. 
Repeat with the unlock button.

If your vehicle is equipped with the Driver Information
Center (DIC), you must program this feature through 
the DIC. See “Driver Information Center” in the Index.