Playing a Compact Disc; RAND (6):- Page 190

3-31

RAND (6): Press this button to reduce background
noise. The double

-

D symbol will appear in the display.

Dolby Noise Reduction is manufactured under a license
from Dolby Laboratories Licensing Corporation. Dolby
and the double

-

D symbol are trademarks of Dolby

Laboratories Licensing Corporation.

SOURCE: Press this button to change to the tape or
disc function when the radio is on. If both a tape and a
disc are installed, the system will first go to tape play;
TAPE SIDE and an arrow will appear on the display. 
If SOURCE is pressed again, the system will go to disc
play; CD PLAY will appear on the display.

EJECT: The system has two EJECT buttons. Press 
the button near the CD slot to remove a disc. Press the
button near the tape slot to remove a tape and the radio
will play.

CLN: If this message appears on the display, the
cassette tape player needs to be cleaned. It will still play
tapes, but you should clean it as soon as possible to
prevent damage to the tapes and player. See “Care of
Your Cassette Tape Player” in the Index. After you clean
the player, press and hold EJECT for five seconds to
reset the CLN indicator. The radio will display 

---

 to

show the indicator was reset.

Your cassette tape player automatically reduces
background noise from tapes encoded with Dolby NR.
You may turn Dolby NR off by pressing the number 
six preset.

Playing a Compact Disc

Insert a disc partway into the slot, label side up. The
player will pull it in. The disc should begin playing.

If you want to insert a CD while the ignition or the radio
is off, first press EJECT or RECALL.

If you’re driving on a very rough road or if it’s very hot,
the disc may not play and an error code may appear 
on the display. When the road becomes smooth or the
temperature returns to normal, the disc should play. 
If the disc comes out, it could be that:

D

E20: The disc is upside down.

D

E20: It is dirty, scratched or wet.

D

E20: There’s too much moisture in the air. 
(Wait about an hour and try again.)

If any error occurs repeatedly or if an error can’t be
corrected, please contact your dealer. If your radio
displays an error number, write it down and provide it to
your dealer when reporting the problem.