Secondary Latch System- Page 330

5-27

2. Turn the wrench counterclockwise until

approximately 6 inches (15 cm) of cable is exposed.

3. Attach the folding wrench to the jack and raise the

jack at least 10 turns.

4. Place the jack under the vehicle, ahead of the rear

bumper. Position the center lift point of the jack
under the center of the spare tire.

5. Turn the folding wrench clockwise to raise the jack

until it lifts the secondary latch spring.

6. Keep raising the jack until the spare tire stops

moving upward and is held firmly in place, this lets
you know that the secondary latch has released