Storing the Spare Tire and Tools- Page 338

5-35

9. Make sure the tire is stored securely. Push, pull, and

then try to rotate or turn the tire. If the tire moves,
use the folding wrench to tighten the cable.

Put back all tools as they were stored in the jack storage
compartment and put the compartment cover back on.

To put the cover back on, slip the tabs on the side of 
the cover into the cover opening. Push the cover in place
and push down the tabs on the cover so that it rests 
in the groove. This secures the cover in place.

When you replace the compact spare with a full

-

size

tire, reinstall the bolt

-

on wheel covers or the center cap

(if equipped). Tighten them “hand tight” over the wheel
nuts, using the folding wrench.