United States; If you have too much brake fluid, it can spill on; the engine. The fluid will burn if the engine is - Page 376

6-31

Your brake master cylinder reservoir is filled with
DOT

-

3 brake fluid. See “Engine Compartment

Overview” in the Index for the location of the reservoir.

There are only two reasons why the brake fluid level in
the reservoir might go down. The first is that the brake
fluid goes down to an acceptable level during normal
brake lining wear. When new linings are put in, the fluid
level goes back up. The other reason is that fluid is
leaking out of the brake system. If it is, you should 
have your brake system fixed, since a leak means that
sooner or later your brakes won’t work well, or won’t
work at all.

So, it isn’t a good idea to “top off” your brake fluid.
Adding brake fluid won’t correct a leak. If you add fluid
when your linings are worn, then you’ll have too much
fluid when you get new brake linings. You should add
(or remove) brake fluid, as necessary, only when work 
is done on the brake hydraulic system.

CAUTION:

If you have too much brake fluid, it can spill on
the engine. The fluid will burn if the engine is 
hot enough. You or others could be burned, and
your vehicle could be damaged. Add brake fluid
only when work is done on the brake hydraulic
system. See “Checking Brake Fluid” in 
this section.

United States

Canada

When your brake fluid falls to a low level, your brake
warning light will come on. See “Brake System Warning
Light” in the Index.