Vehicle Storage- Page 382

6-37

8. Unhook the electrical connector by lifting up the

gray tabs and separate the connector from the 
bulb base.

9. Install the new bulb into the electrical connector.

Push the bulb firmly enough so that the gray tabs
hook over the tab on the bulb.

10. Carefully put the bulb assembly back into the lamp

housing and turn the bulb socket one

-

quarter of a

turn counterclockwise.

11. Align the retaining clips on the back of the

headlamp with the rectangular holes in the
mounting panel.

12. Push firmly on both ends of the headlamp to snap it

into position.

13. Push the retaining clip down to its original position.

14. Reinstall the wing stud.