Chevrolet Tahoe/Suburban Owner Manual (GMNA-Localizing-U.S./Canada/
Mexico-15555985) - 2022 - CRC - 8/3/21
246
Driving and Operating
Warning (Continued)
.
On slippery roads where fast changes
in tire traction can cause excessive
wheel slip.
J
:
Press to turn the system on or off. The
indicator turns white on the instrument
cluster when ACC is turned on.
RES+ :
Press briefly to resume the previous
set speed or to increase vehicle speed if ACC
is already activated. To increase speed by
about 1 km/h (1 mph), press RES+ briefly. To
increase speed to the next 5 km/h (5 mph)
mark on the speedometer, hold RES+.
SET
–
:
Press briefly to set the speed and
activate ACC or to decrease vehicle speed if
ACC is already activated. To decrease speed
by about 1 km/h (1 mph), press SET
–
briefly.
To decrease speed to the next 5 km/h
(5 mph) mark on the speedometer,
hold SET
–
.
*
:
Press to disengage ACC without erasing
the selected set speed.
[
:
Press to select a following gap setting
for ACC of Far, Medium, or Near.
The speedometer reading can be displayed
in either English or metric units. See
Instrument Cluster (Base Level)
or
. The
increment value used depends on the units
displayed.
Switching Between ACC and Regular Cruise
Control
To switch between ACC and regular cruise
control, press and hold
*
. A Driver
Information Display (DIC) message displays.
See
ACC Indicator (Base
Level)
ACC Indicator (Uplevel)
Regular Cruise Control Indicator
When ACC is engaged, a green
o
or
\
indicator will be lit on the instrument cluster
and the following gap will be displayed.
When the regular cruise control is engaged,
a green
J
indicator will be lit on the
instrument cluster; the following gap will
not display.
When the vehicle is turned on, the cruise
control mode will be set to the last mode
used before the vehicle was turned off.