Seats and Restraints; Manual Seatback Folding (If Equipped)- Page 50

2022 Chevrolet suburban Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

22_CHEV_Tahoe_Suburban_OM_en_US_U_84793869A_2021AUG09
04-Instruments and Controls_en_US
Instruments and Controls
08-Driving and Operating_en_US
Driving and Operating
09-Vehicle Care_en_US
Vehicle Care
background image

Chevrolet Tahoe/Suburban Owner Manual (GMNA-Localizing-U.S./Canada/

Mexico-15555985) - 2022 - CRC - 8/3/21

Seats and Restraints

49

To return the third row seatback to the
upright position:

1. Ensure the seat belt is in the belt

stowage clip.

2. Open the liftgate to access the controls

for the seat.

3. Press and hold the switch (2) on the side

trim of the cargo area to raise the third
row seatback.
The left switch raises the left seatback,
and the right switch raises the right
seatback.

{

Warning

A seat belt that is improperly routed, not
properly attached, or twisted will not
provide the protection needed in a crash.
The person wearing the belt could be
seriously injured. After raising the rear
seatback, always check to be sure that
the seat belts are properly routed and
attached, and are not twisted.

4. Reconnect the center seat belt mini-latch

to the mini-buckle. Do not let it twist.

5. Pull on the seat belt to be sure the

mini-latch is secure.

6. Repeat the steps for the other seatback,

if desired.

Manual Seatback Folding (If Equipped)

1. Pull up on the lever to release the

seatback.

2. Push the seatback forward to lay flat.
3. Repeat for the other seatback,

if necessary.

Detailed Information for 2022 Chevrolet suburban Owner Manual

Lists of information found in 2022 Chevrolet suburban Owner Manual - Page 50

  • 1. Ensure the seat belt is in the belt stowage clip.
  • 2. Open the liftgate to access the controls for the seat.
  • 3. Press and hold the switch (2) on the side trim of the cargo area to raise the third row seatback.
  • 4. Reconnect the center seat belt mini-latch to the mini-buckle.
  • 5. Pull on the seat belt to be sure the mini-latch is secure.
  • 6. Repeat the steps for the other seatback, if desired.
  • 1. Pull up on the lever to release the seatback.
  • 2. Push the seatback forward to lay flat.
  • 3. Repeat for the other seatback, if necessary.