Positioning the printer; Power supply; Environment- Page 12

ABOUT THIS PRINTER   1 - 4

Positioning the printer

Please read the following before you use the printer.

Power supply

Use the printer within the recommended power range.

Power source:

USA and Canada:

AC 100 to 120 V, 50/60 Hz

Europe and Australia: AC 220 to 240 V, 50/60 Hz

The power cord, including extensions, should be no longer than 5 meters (16½ feet). 

Do not share the same power circuit with other high-power appliances, such as an air conditioner, copier, 
shredder and so on. If you cannot avoid using the printer with these appliances, we recommend that you 
use a voltage transformer or a high-frequency noise filter.

Use a voltage regulator if the power source is not stable.

Environment

■

Make sure that the power outlet/socket is near the printer and is easy to get to so that, if there is an 
emergency, it can be easily unplugged.

■

Only use the printer within the following ranges of temperature and humidity:

Temperature: 10 °C to 32.5 °C (50 °F to 90.5 °F)

Humidity: 20% to 80% (without condensation)

■

The printer should be used in a well-ventilated room.

■

Put the printer on a flat, horizontal surface.

■

Keep the printer clean. Do not put the printer in a dusty place.

■

Do not put the printer where the ventilation hole of the printer is blocked. Keep a gap of approximately 
100 mm (4 in.) between the ventilation hole and the wall.

■

Do not put the printer in direct sunlight. If you have to put it near a window, use a blind or a heavy 
curtain to protect the printer from direct sunlight.

■

Do not put the printer near devices that contain magnets or generate magnetic fields.

■

Do not subject the printer to strong physical shocks or vibrations.

■

Do not expose the printer to open/naked flames or salty or corrosive gasses.

■

Do not put objects on top of the printer.

■

Do not put the printer near an air conditioner.

■

Keep the printer horizontal when you carry it.