IMPORTANT - For Your Safety; Disconnect device; Caution for LAN connection (For model HL-6050DN only)- Page 171

B - 3

   APPENDIX (FOR EUROPE AND OTHER COUNTRIES)

IMPORTANT - For Your Safety

To ensure safe operation the supplied three-pin plug must be inserted only into a standard three-pin 
power outlet that is properly grounded through the standard electrical wiring. 

Extension cords used with this printer must be three-pin plug type and correctly wired to provide proper 
grounding. Incorrectly wired extension cords may cause personal injury and equipment damage. 

The fact that the equipment operates satisfactorily does not imply that the power is grounded and that 
the installation is completely safe. For your safety, if in any doubt about the effective grounding of the 
power, call a qualified electrician. 

Disconnect device

You must install this printer near a power outlet that is easily accessible. In case of an emergency, you 
must disconnect the power cord from the power outlet to shut off the power completely.

Caution for LAN connection (For model HL-6050DN only)

Connect this product to a LAN connection that is not subjected to overvoltages.

IT power system (For Norway only)

This product is also designed for an IT power system with phase-to-phase voltage 230V.

Geräuschemission / Acoustic noise emission (for Germany only)

Lpa < 70 dB (A) DIN 45635-19-01-KL2

Wiring information (for UK)

Important

If you need to replace the plug fuse, fit a fuse that is approved by ASTA to BS1362 with the same rating 
as the original fuse.

Always replace the fuse cover. Never use a plug that does not have a cover.

Warning - This printer must be earthed.

The wires in the mains lead are coloured in line with the following code:

Green and Yellow: Earth

Blue: Neutral

Brown: Live

If in any doubt, call a qualified electrician.