List of factory settings; Network factory default setting; 3 - 24- Page 95

3 - 24   CONTROL PANEL

List of factory settings

Table 3-1 shows the factory settings. 

Network factory default setting

If you wish to reset the print server back to its default factory settings (resetting all information such as 
the password and IP address information), hold down the network test button on the network board 
(NC-6100h) for more than 5 seconds.

■

The emulation mode affects the setting. Effective modes are shown in brackets in the following 
table.

■

The following settings cannot be restored to the factory settings with FACTORY RESET in the 
RESET MENU menu: INTERFACE menu, HRC, PAGE PROTECTION, SCALABLE FONT, 
LOCK PANEL, page counter and local language for display messages.

■

The COPY setting is always restored to the factory setting when the printer is turned off and on 
again.