Authentication Method- Page 62

Wireless configuration for Windows

®

48

4

13

The wizard will search for wireless networks 
available from your machine. If more than one 
wireless network is available, the following list 
appears. Choose the Ad-hoc network you wish to 
associate the machine with, and then click Next.

If no Ad-hoc wireless network are available, you 
need to create a new wireless network. Go to step 
16.

Note

•

If your target Ad-hoc network does not appear on 
the list, you can manually add it by clicking the 
Add button. Follow the on-screen instructions for 
entering the Name (SSID) and the Channel 
number.

•

If the list is blank, check if the machine is within 
range for wireless communication. Then, click 
Refresh.

14

If your network is not configured for Authentication 
and Encryption, the following screen will appear. To 
continue installation, click OK and go to step 17.

15

If your network is configured for Authentication and 
Encryption, the following screen will appear. When 
configuring your Brother wireless machine, you must 
ensure that it is configured to match the 
Authentication and Encryption settings of your 
existing wireless network. Choose the 
Authentication Method and Encryption Mode 
from the pull-downs in each setting box. Then enter 
the Network key and click Next. Go to step 17

Note